e.p.t.q. Lidocaine S100
1 syringe / 1.1ml
1 syringe / 1.1ml
No CE mark on Box with Lidocaine
For Domestic Use (No CE Mark)
Composition: Cross-linked Hyaluronic acid
Ingredients: 24 mg/mL Hyaluronic acid, 0.3% Lidocaine
Injection Site: Dermis
Application Areas: Treat superficial irregularities of the skin, such as fine lines in the forehead, wrinkles around the mouth, crow’s feet around the eyes, and fine lines on the nose bridge. Fill temples and tear troughs.
Maintenance Period: 6 to 12 months
For Domestic Use (No CE Mark)
Composition: Cross-linked Hyaluronic acid
Ingredients: 24 mg/mL Hyaluronic acid, 0.3% Lidocaine
Injection Site: Dermis
Application Areas: Treat superficial irregularities of the skin, such as fine lines in the forehead, wrinkles around the mouth, crow’s feet around the eyes, and fine lines on the nose bridge. Fill temples and tear troughs.
Maintenance Period: 6 to 12 months
e.p.t.q. Lidocaine S100
No CE mark on Box with Lidocaine
For Domestic Use (No CE Mark)
What is e.p.t.q. S100 dermal filler?
e.p.t.q. S100 dermal filler is made of cross-linked HA, and guarantees that it is made of safe pharmaceutical-grade raw materials. More specifically, e.p.t.q. S100 dermal filler employs 2CM (Two Cross-linking Method) technology, which uses both chemical and physical cross-linking to minimize BDDE levels, reduce endotoxin levels to less than 0.1EU/mL, and guarantee maximum cross-linking efficiency. This produces a safe and viscoelastic gel that is used in e.p.t.q. S100 dermal filler. The high viscoelasticity of e.p.t.q. S100 dermal filler allows for exquisite lifting and precise molding. After receiving an injection procedure using e.p.t.q. S100 dermal filler, patients can expect less swelling after treatment, and HA that stays highly pure for extended durations.
e.p.t.q. S100 dermal filler is made of cross-linked HA, and guarantees that it is made of safe pharmaceutical-grade raw materials. More specifically, e.p.t.q. S100 dermal filler employs 2CM (Two Cross-linking Method) technology, which uses both chemical and physical cross-linking to minimize BDDE levels, reduce endotoxin levels to less than 0.1EU/mL, and guarantee maximum cross-linking efficiency. This produces a safe and viscoelastic gel that is used in e.p.t.q. S100 dermal filler. The high viscoelasticity of e.p.t.q. S100 dermal filler allows for exquisite lifting and precise molding. After receiving an injection procedure using e.p.t.q. S100 dermal filler, patients can expect less swelling after treatment, and HA that stays highly pure for extended durations.
Characteristics of e.p.t.q. S100 dermal filler
e.p.t.q. S100 dermal filler should be injected in the dermis. e.p.t.q. S100 dermal filler can be used to treat superficial irregularities of the skin, such as fine lines in the forehead, wrinkles around the mouth, crow’s feet around the eyes, and fine lines on the nose bridge. e.p.t.q. S100 dermal filler can also be used to fill the temples and tear troughs. Aesthetic effects of e.p.t.q. S100 dermal filler last 6 to 12 months.
e.p.t.q. S100 dermal filler should be injected in the dermis. e.p.t.q. S100 dermal filler can be used to treat superficial irregularities of the skin, such as fine lines in the forehead, wrinkles around the mouth, crow’s feet around the eyes, and fine lines on the nose bridge. e.p.t.q. S100 dermal filler can also be used to fill the temples and tear troughs. Aesthetic effects of e.p.t.q. S100 dermal filler last 6 to 12 months.
How to use e.p.t.q. S100 dermal filler
General Instructions for Filler Injection Procedure
Dermal filler injections should be administered only by trained medical professionals with the proper experience and expertise. Individuals without medical certifications should not attempt to self-inject, as there is risk for health-related and aesthetic complications.
Patients should keep in mind the timing of when they decide to receive a filler injection procedure. Even with the proper technique and experience, bruising and swelling is usually unavoidable, and can last for up to a week. Hence, when scheduling a filler injection procedure with a licensed practitioner, be mindful to leave adequate time for recovery before any upcoming important events.
With good technique and comfort measures, certified medical professionals can provide a filler procedure that is tolerable in pain levels. Before the injection period, the injection site and the surrounding areas should be adequately cleaned and disinfected. The entire filler injection process typically takes around 15 to 30 mins. After the procedure, the patient should be given filler aftercare instructions, and are able to leave the clinic.
Certified medical professionals administer facial fillers using a combination of filler injection techniques in most cases.
Common Filler Injection Techniques
1. Tunneling Technique
The tunneling technique is most commonly used to correct fine lines and straight wrinkles. This injection technique is versatile, as it can treat superficial skin lines, deep-set wrinkles, or areas of diffuse volume loss. The tunneling technique is a highly preferred way to inject facial fillers as it is considered the safest and most natural. To produce optimal results, the needle should be inserted at a slanted, 30 to 45 degree angle, which follows the direction of the wrinkle.
Dermal fillers are not to be injected when the cannula or needle is entering the skin, or while placed at its endpoint. All dermal fillers should be injected when the needle is in the process of being withdrawn. This is called “retro-trace” or “retrograde” injections, and it ensures that the filler is distributed in a safe and even manner in the right areas.
2. Point Technique
The point technique involves a process in which several small droplets of filler are injected into the deep dermis (located at the deep layers of the skin) or the subcutaneous layer (located below the skin). These microinjections are administered consecutively in close proximity to one another. This process causes the small droplets of filler to meld and work together to lift the wrinkle up and reduce its depth and contours. The point technique is particularly effective at providing overall hydration to the skin or filling a large area in the deep dermis that is hollow.
A limitation of the point technique is that it may produce less natural-looking results and may cause further complications. Hence, the point technique should only be used in situations deemed appropriate by the certified practitioner.
3. Stretching Technique
The stretching technique requires stretching and applying pressure to the skin that surrounds the the targeted wrinkle. The application of tension to the skin will allow the needle to be placed and angled more easily and more precisely. This enables better visualization through the skin, and overall ensures that the filler is being administered correctly in the intended areas. The stretching technique is typically applied to the areas with excess, sagging or loose skin.
4. Dual Plane Technique
The Dual Plane Technique involves the injection of facial filler to two different levels of the skin in the same area. The two different levels are most commonly the dermis, which is the middle layer of the skin, and the subdermal plane, which is the level directly below the skin. The second injection administered to the deeper level (i.e. the subdermal plane) is used to enhance the effects of the initial injection administered at the upper layer. In some cases, two different types of fillers are used for the two different layers. The filler with thinner consistency is administered to the upper layer, while the filler with thicker consistency is administered to the lower layer.
This technique is typically employed in two situations. First, if the patient’s target area is in constant movement regularly, the dual plane technique can provide more natural-looking results of the filler across all potential facial expressions. Second, this technique is particularly useful when trying to correct an area of the face where there are both wrinkles in the superficial layer, and volume loss in the deeper layer.
Why is e.p.t.q. S100 dermal filler recommended?
General Instructions for Filler Injection Procedure
Dermal filler injections should be administered only by trained medical professionals with the proper experience and expertise. Individuals without medical certifications should not attempt to self-inject, as there is risk for health-related and aesthetic complications.
Patients should keep in mind the timing of when they decide to receive a filler injection procedure. Even with the proper technique and experience, bruising and swelling is usually unavoidable, and can last for up to a week. Hence, when scheduling a filler injection procedure with a licensed practitioner, be mindful to leave adequate time for recovery before any upcoming important events.
With good technique and comfort measures, certified medical professionals can provide a filler procedure that is tolerable in pain levels. Before the injection period, the injection site and the surrounding areas should be adequately cleaned and disinfected. The entire filler injection process typically takes around 15 to 30 mins. After the procedure, the patient should be given filler aftercare instructions, and are able to leave the clinic.
Certified medical professionals administer facial fillers using a combination of filler injection techniques in most cases.
Common Filler Injection Techniques
1. Tunneling Technique
The tunneling technique is most commonly used to correct fine lines and straight wrinkles. This injection technique is versatile, as it can treat superficial skin lines, deep-set wrinkles, or areas of diffuse volume loss. The tunneling technique is a highly preferred way to inject facial fillers as it is considered the safest and most natural. To produce optimal results, the needle should be inserted at a slanted, 30 to 45 degree angle, which follows the direction of the wrinkle.
Dermal fillers are not to be injected when the cannula or needle is entering the skin, or while placed at its endpoint. All dermal fillers should be injected when the needle is in the process of being withdrawn. This is called “retro-trace” or “retrograde” injections, and it ensures that the filler is distributed in a safe and even manner in the right areas.
2. Point Technique
The point technique involves a process in which several small droplets of filler are injected into the deep dermis (located at the deep layers of the skin) or the subcutaneous layer (located below the skin). These microinjections are administered consecutively in close proximity to one another. This process causes the small droplets of filler to meld and work together to lift the wrinkle up and reduce its depth and contours. The point technique is particularly effective at providing overall hydration to the skin or filling a large area in the deep dermis that is hollow.
A limitation of the point technique is that it may produce less natural-looking results and may cause further complications. Hence, the point technique should only be used in situations deemed appropriate by the certified practitioner.
3. Stretching Technique
The stretching technique requires stretching and applying pressure to the skin that surrounds the the targeted wrinkle. The application of tension to the skin will allow the needle to be placed and angled more easily and more precisely. This enables better visualization through the skin, and overall ensures that the filler is being administered correctly in the intended areas. The stretching technique is typically applied to the areas with excess, sagging or loose skin.
4. Dual Plane Technique
The Dual Plane Technique involves the injection of facial filler to two different levels of the skin in the same area. The two different levels are most commonly the dermis, which is the middle layer of the skin, and the subdermal plane, which is the level directly below the skin. The second injection administered to the deeper level (i.e. the subdermal plane) is used to enhance the effects of the initial injection administered at the upper layer. In some cases, two different types of fillers are used for the two different layers. The filler with thinner consistency is administered to the upper layer, while the filler with thicker consistency is administered to the lower layer.
This technique is typically employed in two situations. First, if the patient’s target area is in constant movement regularly, the dual plane technique can provide more natural-looking results of the filler across all potential facial expressions. Second, this technique is particularly useful when trying to correct an area of the face where there are both wrinkles in the superficial layer, and volume loss in the deeper layer.
Why is e.p.t.q. S100 dermal filler recommended?
e.p.t.q. S100 dermal filler is part of the e.p.t.q. brand, which prides in helping modern individuals improve self-confidence through the use of its products. e.p.t.q. S100 dermal filler is made through continued R&D to ensure safety, so clients do not need to worry about pain or side effects when receiving the procedure. Moreover, the amount of BDDE in e.p.t.q. S100 dermal filler is strictly managed at (MoD ~1%). e.p.t.q. S100 dermal filler is 100% cross-linked, allowing for optimum rheological property with minimum BDDE. Furthermore, through examinations using the tack test, e.p.t.q. S100 dermal filler was proven to have excellent cohesiveness, which allows for the ability of the filler to hold its original shape. Additionally, the efficacy of e.p.t.q. S100 dermal filler is proven, as an independent expert panel and blinded investigators indicated that wrinkle improvement can be seen using the WSRS (Wrinkle Severity Rating Scale).
※ Caution
We, Medi-Fella Korea, do NOT take any responsibility for medical issues and problems that occur during cosmetic procedures.